Data Points / Tag Type Glossary

Data Point ID

Data Point Type

Description

0

Process data (FB)

A basic and default process data feedback data point. It is used to collect most data from the HMI on the machine.

1

Machine speed (FB)

This point is used to collect the machine’s run (line) speed during standard operation. It is the actual speed of the machine, and is used across web services such as the Machine Overview/Mobile Portal/API applications.

2

Production material total count delta

This point tracks the change (delta) in total material count on the machine during its operation time. This is a requirement for OEE calculations – make sure the correct scale type is set for Delta value.

3

Production material good count delta

This point tracks the change (delta) in good material count on the machine during its operation time. This is a requirement for OEE calculations – make sure the correct scale type is set for Delta value.

4

Machine speed alt. (FB)

This point tracks an optional, alternate speed measured in a different unit listed in unit of data point.

5

Production material total count alt. delta

This point tracks an optional, alternate total material delta measured in a different unit listed in unit of data point.

6

Production material good count alt. delta

This point tracks an optional, alternate good material delta measured in a different unit listed in unit of data point.

7

Production material reject count delta

This point tracks the change (delta) in rejected or bad material count on the machine during its operation time.

8

Production material reject count alt. delta

This point tracks an optional, alternate waste material delta measured in a different unit listed in unit of data point.

10

Recipe data (SP)

Value will be used as recipe point in Recipe Management.

11

Machine speed (SP)

Machine speed set point, used in recipe management.

12

Machine speed (SP) alt.

Alternate machine speed set point, used in recipe management.

13

Downtime code

This point is used for automatic downtime tracking. If this code is configured, and the PLC Value (set in Downtime Tracking) matches this value, the code will automatically assign to the machine.

14

Downtime notes

Automatically inserts downtime note when certain downtime codes are applied.

15

Product name

For machines with Job Management, this point tracks the current product name of the job running on the machine.

16

Product description

For machines with Job Management, this point tracks the current product description of the job running on the machine.

17

Recipe name

For machines with Recipe Management, this point tracks the current name of the recipe running on the machine.

18

Recipe description

For machines with Recipe Management, this point tracks the current description of the recipe running on the machine.

19

Job Name / Number

For machines with Job Management, this point tracks the current job name or number of the job running on the machine.

20

Job Description

For machines with Job Management, this point tracks the current job description of the job running on the machine.

21

Customer name

For machines with Job Management, this point tracks the current customer name of the job running on the machine.

22

Customer description

For machines with Job Management, this point tracks the current customer description of the job running on the machine.

23

Target run rate

For machines with Job Management, this point tracks the target run speed of the job running on the machine. This will affect OEE values for the machine and the job run.

30

Current Recipe ID

For machines with Recipe Management, this point tracks the current recipe ID for the recipe running on the machine.

31

Requested Recipe Name

For machines with Recipe Management, this point is used for when the controls will indicate the next recipe to be loaded.

32

Operation Name

For machines with Job Management, this point tracks the current operation name of the job running on the machine.

33

Operation Description

For machines with Job Management, this point tracks the current operation description of the job running on the machine.

34

Pass Number

Quality – machines go thru same operation multiple times, this data point indicates the pass number of the current operation.

35

Tool Name

For machines with Job Management, this point tracks the current tool name in use for the job running on the machine.

36

Machine State

Number indicating machine state related to production, Stopped, Running, Idle etc. as defined in the machine (varies by product line) configuration table. Used in downtime tracking, OEE uptime calculations, and machine state diagrams.

37

Recipe Load Bit

This point is used to indicate if a recipe loads successfully. Used to coordinate the loading of recipes.

38

Master Unit Of Production

Allows controls to specify unique ID for major prod. unit (rolls, pallets, etc).

39

Rewind Spindle 1 Diameter

This point is used to indicate the diameter of 1^st rewind spindle on machines.

40

Rewind Spindle 1 Length

This point is used to indicate the length of 1^st rewind spindle on machines.

41

Rewind Spindle 2 Diameter

This point is used to indicate the diameter of 2^nd rewind spindle on machines.

42

Rewind Spindle 2 Length

This point is used to indicate the length of 2^nd rewind spindle on machines.

43

Unwind Spindle 1 Diameter

This point is used to indicate the diameter of 1^st unwind spindle on machines.

44

Unwind Spindle 1 Length

This point is used to indicate the length of 1^st unwind spindle on machines.

45

Unwind Spindle 2 Diameter

This point is used to indicate the diameter of 2^nd unwind spindle on machines.

46

Unwind Spindle 2 Length

This point is used to indicate the length of 2^nd unwind spindle on machines.

47

Splice Count Delta

This point counts the number of splices, used to determine roll change.

48

Machine Max Speed

Used to track the machine max speed value.

49

Collection Trigger

This point is used to track any instance of a trigger value used in trigger-based data collection.

50

Job input unit count

This point tracks the total material count on a machine. Used in the event service.

51

Job output unit count

This point tracks the good material count on a machine. Used in the event service.

52

Job bad unit count

This point tracks the rejected or bad material count on a machine. Used in the event service.

53

Total production time

This point tracks the total production time of a machine. Used in the event service.

54

Recipe number

For machines with Recipe Management, this point tracks the number of the recipe running on the machine. Used in the event service.

55

Job reference

For machines with Job Management, this point tracks the current job reference of the job running on the machine. Used in the event service.

56

Fault category

For machines with Job Management, this point tracks the current job fault category of the job running on the machine. Used in the event service.

57

Fault location

For machines with Job Management, this point tracks the current job fault location of the job running on the machine. Used in the event service.

58

Fault originator

For machines with Job Management, this point tracks the current job fault originator of the job running on the machine. Used in the event service.

59

Total input unit count

This point tracks the accumulated total material count on the machine for all time. Used in the event service.

60

Total output unit count

This point tracks the total accumulated good material count on the machine for all time. Used in the event service.

61

Total bad unit count

This point tracks the total accumulated rejected or bad material count on the machine for all time. Used in the event service.

62

Material rejection source

This point tracks the rejected or bad material source on the machine during its operation time. Used in the event service.

63

Material rejection cause

This point tracks the rejected or bad material cause on the machine during its operation time. Used in the event service.

64

Total running time

This point tracks the total machine running time. Used in the event service.

65

Total machine time

This point tracks the total machine time. Used in the event service.

66

Downtime Code IoT

For machines that use the tag type Downtime Code, this point provides an unfiltered value used in the event service.